|
Product Details:
|
| Material: | Alloy Steel 10B21 | Production Process: | Cold Heading, Cold Forging |
|---|---|---|---|
| Surface Finish/treatment: | Nickel | Tolerant: | +/- 0.05mm |
| Lead Time: | 10~15 Working Days | Size: | M14/M10*13 |
| Single: | 5.05g/pcs | ||
| High Light: | Cold Forging Sleeve Non Standard Fastener,M10x13mm Non Standard Fastener,DIN internal threaded sleeve |
||
10.9-Grade High-Strength Iron Threaded Sleeves Threaded Bushings Threaded Protective Sleeves Standard Self-Threading Inserts
| Material | Stainless steel, brass, copper, aluminum, aluminum alloy, steel, low carbon steel, medium carbon steel, alloy steel, titanium alloy, etc. |
| Production Process | Cold heading, cold forging, CNC machining, CNC turning, CNC milling, drilling, tapping, grinding, wire cutting |
| Surface finish/treatment | Zinc plating, nickel,Gilded , silver, chromium, anodizing, sandblasting, painting, powder coating, silk screen, polishing, passivation, laser engraving |
| Drawing Format | jpg/.pdf/.dxf/.dwg/.igs./.stp/x_t. etc |
| Tolerant | +/- 0.05mm |
| Quality assurance | Self-inspection of production technicians |
| Engineer inspection in production | |
| QC inspection after finished product | |
| MOQ | 50000 pieces |
| Payment terms | T/T |
| Shipment | According to customer requirements, it can be delivered by express and sea |
| Lead time | 10~15 working days |
| Salt spray requirements | Up to more than 200 hours |
product detail presentation
Standard Self-Threading Inserts
Threaded protective sleeves
Factory environmental display
CNC machining center
Self-Threading inserts are an economical, easy-to-use solution for adding a thread to a variety of steel or alov.
Available in standard or flanged configuration, Self-Threading inserts are steel inserts having both an external and internal thread and two slots which provide rapid cutting action. When driven into a cored or drilled hole, the insert cuts its own thread cleanly and evenly.
Friction between the insert and the steel permanently holds it in place after installation.
Self-threading inserts can be installed into steel or alloy materials with a tap wrench or with a drill press and tapping head. No special tooling is required.
All of the above products are produced by our company. Most of them have complete sets of molds or some molds. If you find us, you can make money. Welcome to call or add wechat:+00886-13423026460
Contact Person: Mrs. Nancy Li
Tel: +86 13423026460
